Plastic mould point gate mold structure features:
(1) the point gate, namely three plate mold. Distributary channel opening in the template, open mould when the spring force and clamping device, under the joint action of start with shunt way dispose module, snap point gate and use the pull rod will clot material from a port, continue to open mold, under the action of limit lever, again from the parting surface of mould parts, using the plunger and ejector sleeve parts ejection.
(2) parts at the top of the hole level lighting used inclined smoke.
(3) in order to ensure the mould smoothly with the clamping device.
(4) in order to eliminate the weld mark need to open special exhaust system.
Note: the above information by Plastic mold factory to sort out on the Internet, welcome to reprint, indicate the source!